Lift the higher fringe of the liner far away from the graphic and fold back close to 3-6 inches (depending on the scale of the graphic).

Place the adhesive aspect of the graphic onto the wall, window, or meant application surface. rigorously position the fabric to align on all sides. Then press the higher corners in situ victimization lightweight pressure.

Using your hands or a squeegee, gently press the fabric in situ, pushing all air bubbles out. begin from the center of the graphic and press toward the surface edges. *Please note, throughout installation you'll be able to reapply if employing a repositionable material (Re-stick or simple Grip). Gently pull diagonally at a forty-five angle and reposition to reapply.

Working from the highest of the graphic to rock bottom, continue by peeling away a lot of the liner and applying lightweight pressure. Continue during this manner till the liner is totally removed and therefore the graphic is in situ.