Flex thermal transfer film is a high quality polyurethane film for applying images / applications (pre-cut on a plotter) to fabrics under the influence of temperature and pressure. It consists of two layers: the film itself with a thermally activated adhesive layer, which is transferred to the fabric and a protective transparent substrate on the front side. Under normal conditions, the adhesive is solid, but at the required temperature it melts and firmly adheres the film to the fabric.

Flex film with a minimum thickness (from 80 to 120 microns) has excellent elasticity and wear resistance, is compatible with absolutely any type of fabric, except for those treated with a special silicone water-repellent composition. Does not deform after washing.

This product  is used to create an original design: logos, applications, numbers and any other images on textiles. 

Application area:

sports uniforms

uniform, overalls

t-shirts

sweatshirts, sweatshirts

jackets

baseball caps

umbrellas

bags 

all types of textiles

Main advantages:

various colors and textures;

simplicity and high speed of production;

durability of the finished application;

saving time, as the substrate can be removed hot;

perfect cutting by the plotter of even the smallest details on the film (it is best to use a knife with a sharpening angle of 45 degrees);

does not cause allergic reactions due to the absence of heavy metals, PVC and plasticizers in its composition.

Attention!

The recommended transfer temperature is 145°C.

The recommended thermal transfer time is 13 seconds.

For maximum durability, do not wash the garment for the first 24 hours. Wash and iron the finished product only from the inside out.