Before you start, it's necessary to analyze and check that setting on your machine (like a Cricut or Silhouette) can offer you the most effective cut thus your style is simple to weed and apply.

However, before we have a tendency to advocate the cut settings for materials from iCraftVinyl.com, we have a tendency to simply wish to notice that the subsequent advised cut settings square measure simply a guide for material from iCraft. each machine is completely different and there square measure such a big amount of alternative variables which will impact the standard of your cut, like however sharp your blade is or the viscousness of your cutting mat. check cuts are your ally as you start with any new product.

Test Cut

What precisely may be a check cut? allow us to offer you some insight.

If you narrow your vinyl or heat transfer vinyl on the incorrect setting, it may lead to loads of frustration once you head to weed it, and probably even wasted material. as an alternative, the cut may even be too deep, leading to the HTV carrier sheet being cut additionally to the vinyl, which may build it a bit tougher - and someday not possible - to weed.

It is necessary to search out the setting that cuts your vinyl simply enough wherever it cuts the fabric however leaves the carrier sheet intact. this can be wherever the check cut comes in. If you've got a Silhouette, there's a setting within the cutters’ software system that will cut an sq. with a triangle within along with your elite settings. If you've got a distinct cutter, sort of a Cricut, style a tiny low form or letter in your cutter’s software system and use our recommendations as your foundation to work out if the cut setting can work for the fabric you chose. each the within and out of doors of your styles ought to cut loose the remainder of the look and also the backing simply.

How to Cut Heat Transfer Vinyl

Now that you've got tested your setting and you are able to cut your style, there square measure one or two a lot of things to notice. Before you narrow your heat transfer vinyl, ensure you mirror your style in your software system. Next, you've got to load it onto your nat to be fed within the machine. All of our completely different HTV materials associated with the carrier sheet are hooked up. The clear carrier sheet keeps your style in situ whereas you remove the negative material, and it permits you to transfer multiple items to your garment in one press.

When cutting HTV, place the carrier sheet facet down on your mat (which is the pretty shiny side). This ensures you narrow through the fabric, however not the carrier sheet. you'll then load the cutting mat along with your material into your machine as prompted, before choosing the proper setting and causing it to be cut.

All of our heat transfer vinyl materials are reflected and applied shiny facets down aside from our flowered heat transfer vinyl. Since this material is custom written in-house to order, the carrier sheet doesn't come back hooked up. you'll have to be compelled to devour some Heat Transfer Mask severally.

How to Cut Adhesive Vinyl

Since adhesive vinyl doesn't have a carrier or transfer tape hooked up, you are doing NOT have to be compelled to mirror this material. Place your sheet on your mat with the colored facet (or style side) facing you. you'll then load the cutting mat along with your material into your machine as prompted before choosing the proper setting and pressing cut. ensure you buy those transfer tapes severally thus you'll be able to take away your style from the backing so it may be applied to your medium of selection.