Step 1: Wipe the dust off the surface on which you intend to place the product.

Step 2: Make sure the surface is dry and grease-free.

Step 3: Separate the strips and press the fasteners together until they click.

Step 4: Remove the backing liner from the fasteners and position it on the back of the PVC frame.

Step 5: Press the fasteners at the top two or at all four corners and remove the backing liner.

Step 6: Position the PVC frame onto the wall and press for 30 seconds.

Step 7: Remove the frame and press each fastener for another 30 seconds.

Step 8: Wait for an hour so that the adhesive of the strips bonds to the wall and frame.

Step 9: Mount the frame back onto each set of fasteners.

Removal:

Step 1: Grab the bottom corners of the frame and pull the frame off the wall.

Step 2: Press the top of the adhesive strip and pull the tab until it comes off the wall.