Hey crafters, Kayla here from the Kayla Makes web log. Applying adhesive vinyl to a mug may be difficult, particularly for a tiro.

How to customise a mug with cricut adhesive vinyl sheets HEYI

So today, i am walking you thru the guidelines and tricks i exploit to form certain the method is foolproof.

Here's what you may need:

HEYI Adhesive Vinyl

HEYI paper

Blank mug

Weeding ToolH

Scraper Tool

Cutting Machine

Tip #1: Properly Clean Mug

This is an enormous step that heaps of individuals skip however it is a should do if you would like the adhesive vinyl to stick properly to the surface of the mug.

Using a cotton pad or clean artefact, spray the mug with alcohol and wipe clean. enable the mug to dry utterly.

Tip #2: Check The Machine's Cut Settings

Another mistake that's simple to form is to forget to envision the cut settings on your explicit machine before you start cutting. If you are doing this, the vinyl might not cut all the method through or on the flip aspect, you'll cut all the method through the paper backing, creating it troublesome to weed.

To adjust the cut settings in Cricut style house, merely choose the fabric you are mistreatment (adhesive vinyl) and so within the following window you'll modify the blade pressure to less, default or a lot of. For HEYI Adhesive Vinyl i exploit the default setting.

Tip #3: Use a top quality Transfer Tape

To many times I've detected of individuals making an attempt to use dollar store contact paper as transfer tape. To be honest, it simply is not the same. once you are operating with adhesive vinyl you would like to use a transfer tape that's created for adhesive vinyl.

how to customise a mug with cricut adhesive vinyl sheets HEYI transfer tape

HEYI paper was created to figure particularly with HEYI Adhesive Vinyl. Cut a bit of transfer tape simply massive enough to hide the planning and use a hand tool tool or one thing the same as apply firm pressure over the planning.

Tip #4: Cut tiny Slits Around style

Coffee mugs area unit nearly always arching. This makes it troublesome to use a flat vinyl image, however it's not impossible!

Use sharp scissors to chop as getting ready to the planning as attainable and so go round the edges of the transfer tape and cut tiny slits all the method around. this may facilitate the decal kind round the curvature of the mug.

Tip #5: Burnish, Burnish, Burnish!

This is a crucial one. you cannot simply place the vinyl decal on the mug, provides it a bit rub and so decide to take away the transfer tape. The vinyl can peel away with the transfer tape 100% of the time.

To avoid peeling up your decal, burnish over the complete style over and another time. i exploit my hand tool tool and firm pressure to hop over the complete style 10-15 times. sometimes afterward i am going back with my fingers and press everything down once more.

Tip #6: Peel Slowly

I'm all for cacophonous off a bandaid however once it involves adhesive vinyl you would like to require it S-L-O-W.

Peel downward associate degreed at an angle nice and slow. If you happen to own any items that wish to start out of the mug, simply press them back off and continue peeling away the transfer tape.

That's all there's to it! With the following pointers and tricks you will be knowledgeable mug maker in no time.

Bonus SVG styles & a Fall Mug!