Specific methods:

1. Add a temperature management device to the lowest of the nozzle to vary the temperature, or add a temperature management device at the secondary cartridge and therefore the main ink tank to vary the temperature.

2. Keep the indoor printing temperature at 20-28 degrees. Second, the impact of wetness In winter, the temperature is low, whether or not it's heating or air-con heating, the ratio can drop (ie dry).

Recommendation:

Keep the ratio of the chamber at 50%-70%. Impact on the nozzle/ink 1st, the electricity within the dry setting is high, which is harmful to the instrumentation. it's additionally at risk of serious phenomena like flying ink throughout the employment of the ink.

Secondly, once the air is dry, the volatilization speed is going to be quicker, and therefore the ink on the surface of the nozzle can dry out quickly, inflicting the nozzle to be clogged. it's straightforward to be expressed as flying ink, frequent disconnection, and oblique spraying throughout the writing. If the nozzle isn't paid attention to, the nozzle is also broken. What ought to I do if the ink becomes sticky in winter?

The following strategies are wont to solve the problem:

1. the initial ink is placed on the radiator or in a very heat space to bit by bit heat up and bit by bit come back to the initial state.

2, it's the employment of boiling water for external heating once it's desperately used. the precise methodology is to pour the boiling water into the basin and so place the initial barrel ink within the water, however, to stop the water vapor from immersing within the water temperature to drop to regarding twenty-seven °C, take away the lid and stir equally. The close temperature used ought to be unbroken at around twenty-seven °C.