Creating your own tailor-made map of all the places you've got traveled through or visited may be a super fun Cricut or Silhouette project. you'll be able to very build it your own by mistreatment totally different colours of vinyl, substrates that the vinyl is applied on, patterns, quotes, or sayings. mistreatment vinyl to create a map of all of the places you’ve been may be a fun thanks to get your family concerned in your crafting addiction too! Get the youngsters excited concerning marking off family vacay destinations once a visit. This project conjointly makes a good gift if left blank and prepared for the gift receiver to fill out.

I’ll walk you thru the fundamentals of however I created my travel map employing a jazz group of each heat transfer vinyl and adhesive vinyl. i made a decision to use simply a us map, however you'll undoubtedly build it a world map if you needed to (just alter the scale of your project accordingly).

What Tools and Materials I Used?

• Wood Board

• Wood Stain

• HTV in Black

• Adhesive Vinyl Pattern

• Weeding Tool

• Sharpie

• Transfer Tape

• Pink Heat Press Machine

• Envelopes

Step 1:

The first issue I did was stain my board mistreatment the Minwax stain. Don’t forget to wear rubber gloves! I used Associate in Nursing previous rag to wipe the stain on the board going with the grain of the wood. I let it sit long to dry, even supposing I’m super impatient, I patterned it absolutely was best.

Step 2:

I cut out the map define and therefore the song lyrics I needed mistreatment black Happy Cut HTV on my Silhouette anaglyph three. I’m very amorous this new HTV, by the way. It’s really easy to weed and to figure with! Next, I weedless away the surplus vinyl and position it on my board.

Step 3:

I adjusted the pressure knob on my heat press to a lightweight pressure - to create the highest platen more faraway from very cheap platen. I created certain the piece of wood work comfortable within the press and adjusted the pressure to wherever it absolutely was progressing to shut fully and lock into place on my board. I used a setting of 275 degrees for five seconds to use the Happy move the wood (yes, HTV on wood. You’ve been missing out if you haven’t tried it yet).

Step 4:

I loaded my flowered adhesive vinyl onto my mat and cut out the individual states. Don’t forget, you won’t mirror this point around since you’re shift to adhesive vinyl. Once it absolutely was all cut, I weedless it and applied the transfer tape to the surface of the vinyl. Squeegee from the middle outward to get rid of any bubbles and to stick the appliance tape to the vinyl.

Step 5:

Before anything, I used a Sharpie to label every state by writing the state abbreviations on the transfer tape. I knew once I cut them apart that my seriously lacking geographics skills would get the most effective of ME. once I finished labelling them, I used scissors to chop every state apart.

Step 6:

Since I created this map for myself, I went ahead and applied the states that I’ve already traveled to on my map (I really was very nice and solely did states that my young man and that i are to along, not simply those I’ve been to – thus this is often one thing we are able to maintain with together). simply pull the state off the paper backing by lifting the transfer tape. Line it up to the HTV state define. Squeegee it down and done! If you’re giving this as a present, you’d skip this step unless perhaps you stuffed in their home state.

Step 7:

I needed to stay my pre-cut states in these cute very little envelopes to stay all of them along and straightforward to search out once it comes time to feature a brand new state. I used four and labelled them as West, Mid West, North East, and South East. I place the precut adhesive states (with transfer tape still covering them) within the envelopes that they belonged in.

Step 8:

Since this map was a project for myself, I went a bit low cost and simply used washi tape to stick the envelopes to the rear of the picket board for safe keeping. I’m certain you'll come back up with means cuter ways in which of attaching them, but hey, it works on behalf of me. I’m conjointly progressing to add an image frame suspender to the rear in order that I will hang this on my wall.

That’s it! It’s a simple project with millions of area for personalization and customization. provides it a go mistreatment your own bit and show North American nation what you come back up with!

Feel free to administer North American nation a decision or email North American nation if you've got any questions on this project and the way you'll be able to produce it yourself reception.