FAQ/ List

What is Die Cutting?

Die cutting, at its most simple level, is the use of a die to form continual identical cuts from a fabric with a machine. consider the die reasonably sort of a kitchen utensil. In producing, obviously, this is often helpful for affordably making thousands of things quickly and with good duplication. you'll be able to learn a lot concerning general die-cutting here. For scrapbookers, cardmakers, and paper crafters, die-cutting conjointly permits the simple creation of good renderings of any given form time when time. you'll be able to simply cut out 9 3” circles for that color-blocked layout in minutes, or twenty-two shapes for wedding invites, obtaining the proper form and cutting anytime, etc. however even as necessary, die cutting machines conjointly provide the cutting of shapes too careful to chop by hand, or for the cutting of shapes that match along dead (as a set) to make a picture or 3D item. you'll be able to cut Associate in Nursing complex doyly in seconds or build treat boxes for a complete category or cluster of friends with a lid that matches nicely and cushy. How cool is that?

Nowadays, die cutters also are used with accessories to assist add a stunning hindrance to your oversewn cards and comes. merely get one in every of the easy-to-use heat add-ons, and your die-cut machine can currently have a shiny alter-ego.

What other speciality vinyl media do you stock?

You can also order glossy, matt, textured, metallic foil, transparent, frosted, tamper evident, wall vinyl, vehicle graphics, glow-in-the-dark, and night reflective vinyls from us.

What are presentation (or photo quality) vinyl prints used for?

The prints we supply are great to look at. And your images will be reproduced at stunning resolutions. Hence this product is also referred to as ‘photo vinyl prints’ meant for presentation purposes.

People install these prints both indoors, and outdoors. But they will deteriorate after some time, if placed in exterior locations. For our door solutions you need to opt for extreme weather prints as explained in the point above.

What are extreme weather vinyl prints?

Extreme weather vinyl prints can withstand the vagaries of the weather and will not deteriorate when installed in outdoor locations. We have specialised rolls of vinyl that have a service temperature of as low as -45° C and as high as + 118° C.

These prints as installed on aircraft, ships, construction equipment, oil-pipelines, water tankers, solar heaters, vehicles, etc.

Are vinyl prints available only as a roll form?

Vinyl prints are available as a roll form with glue on the lower surface. These prints can be pasted on smooth surfaces. We can also mount the prints on a rigid sheet of sunboard for you. 

What are the various types of vinyls that I need to be aware of?

We have a range of uncoated, coated, grey-back, bubble-free, and extreme weather vinyls at our end. We can even mount the same on the Sunboard. Do take a look at the variants section, on this page for more details on the same.

What is Printable Vinyl Sticker Made of?

Think of self-adhesive vinyl as a large-sized roll of smooth and evenly finished plastic. This material has the following components.

When Should I Weed My Vinyl Design?

It’s recommended that you avoid weeding your design until you are going to start ironing it or applying heat.

For simple storage, transportation or to offer decals as gifts, it may be a good idea to roll up anything you have printed in a Teflon sheet or in as simple material like baking paper.  This will allow you to preserve the look and construction of your design.

There is nothing to say you have to use your garment decoration or designs right away!

What Temperature Should I Use For Heat Transfer Vinyl?

What temperature to use may vary depending on the fabric you are using, as well as the type of transfer film.

Natural fibres and materials such as cotton will be able to withstand firm pressure with temperatures of 320˚F or 160˚C.  However, you will need to be careful with polyester, as it is at greater risk of getting damaged at higher heats.

Heat transfer vinyl should be applied to polyester at heats no hotter than 270˚F or 130˚C.  While the fabric does have a higher boiling point, this is the optimum temperature to use for the best results.

As a general rule, we recommend testing press any designs you print to ensure you find the best rhythm and process for the results you desire.

How Do I Care For My Designs After Printing?

Do not be afraid as printed garment care is very simple!

Some tips to follow:

you should always avoid washing any garments you have used printable HTV vinyl on for up to 24 hours after application.

As you would normally, pay attention to washing instructions on the garment involved and avoid washing at temperatures higher than 40˚C.

You will be able to wash garments in a standard machine, too, just as long as you make sure they are turned inside-out before you put them in!

Gentle cycles are advised to be best, which means you should avoid any special cycles or rinses if you can help it.